When you buy a Mako system the setup is normally done by your Mako provider via the control panel on www.makonetworks.com . The Mako box is shipped out to your office or offices if you are buying multiple appliances. It then takes three steps to have your Mako system up and running, and have your network protected.

Three step installation

1. Connect the Mako box to your network
2. Connect the Mako box to the Internet socket
3. Connect the power and turn it on!

Your network is then protected, either you or your IT provider can then make changes as required.

• How the system works
• Installation and setup
• Reporting overview
• Management overview
• GPL Compliance

Login to a fully functional demo of the reporting and management console available to you when you buy a Mako system.

The Mako box

Overview

The Mako 'box' is a powerful device that connects your computer network to the internet and in conjunction with the Mako Networks Central Command Servers, protects your network as well as provides useful functionality.

The Mako 'box' has connectors on the back to connect your network, internet and power cables to.  If your Internet connection fails, the Mako has a plug for a computer screen giving you access to the 'Mako Scope' which pinpoints the problem  and shows you other useful information.